Single leaf, double leaf and fixed panels. With valid Certificate of Conformity.
Finished work
Rated for fire. Clear as day.
Furnace test
Fire test
Two hours of fire. Still closed.
000minIn the furnace
1-hour system2-hour system
1 hr2 hr
Scroll to run the clock. Each system is furnace-tested for its full rated time: 1 hour, or 2 hours.
Certificate of Conformity
With valid Certificate of Conformity.
All of our door and fixed panel systems comes with a valid COC under the Product Listing Scheme. Without this COC label given and fixed on the door and fixed panel systems, the door and panel systems are not a valid, approved fire rated insulated product.
Products
Glass only. Two ratings.
Anatomy of a door system
Every part is rated.
Tap a point on the door.
Clear glazing rated with the door system, for 1 or 2 hours. It stays in the frame while the fire is on the other side.
A steel frame, powder coated or finished with Stainless Steel capping, like this one.
Seals that swell with heat and close the gaps where the door leaf meets the frame.
Lever handles, hinges and locks that belong to the certified system, not off the shelf.
The fixed glass panel above is part of the same rated door system, so the whole opening holds.
Before and after
Same exit. Now clear.
A solid steel exit door, replaced with fire rated glass. Drag to compare.
Install protocol
Four steps. No shortcuts.
12
Hours, set by the Fire Code01Specify
Match the rating
The Fire Code sets the rating for each opening. We confirm 1 hour or 2 before anything is made.
02Install
Fit to the system
Frame alignment, clearances, fixings and perimeter seals, exactly as the certified system specifies.
03Test
It must close itself
The self-closer has to shut the door fully, from any angle, over the latch. Every time.
04Certify
Label and hand over
The COC label is given and fixed on the door or fixed panel. Without it, the system is not a valid, approved fire rated insulated product.
Questions
Straight answers.
Do you make timber fire doors?
No. JT does glass only: fire rated glass door systems and fixed glass panels.
Which ratings do you supply?
1-hour and 2-hour door systems and fixed panels, matched to what the Fire Code requires at each opening.
How do I know a door is certified?
It must come with a valid Certificate of Conformity (COC) under the Product Listing Scheme, and the COC label must be given and fixed on the door or fixed panel. Without this label, the system is not a valid, approved fire rated insulated product.
Can a solid fire door be replaced with glass?
Often, yes. That is the before and after above. We confirm the rating that opening needs first.
Who is behind JT?
JT Glazing Metal Works Pte Ltd works alongside its sister company Dengya Glass, in glass supply and installation since 2006.
Quotation
Need a door that passes inspection?
Send a photo of the opening. We'll tell you the rating it needs and what it takes. Every door comes with a valid Certificate of Conformity.